Articles by: Minerva Gronchi

Water Stains On The Ceiling Are Signs You Need To Check The Roof

Service Week February 21, 2017 at 9:45 am

Damaged Ceiling
The formation of water stains on the ceiling indicates roofing problems that need to be resolved immediately. Failure to do so may worsen the issue and with repair cost that could blow through the roof.

The surface of your ceiling may start to show small stains with the passing of time. But if huge water stains suddenly appear, it may indicate a bigger problem with your roof and would need immediate attention. Failing to resolve this speedily could compound the issue and lead to more major problems. Below are some of the telltale water stains that indicate you may have roof problems.

Ceiling Water Stains

Perhaps one of the most telling sign that you have a roof problem is the formation of water stains on your ceiling, as pointed out by Star Tribune. The trouble with this is that water stains rarely form underneath the section of the roof that may have a leak. In fact, it would have been better if the leak is big because there is a chance it will create ceiling stains directly underneath. If the leaks are a wee bit, pinpointing the problematic spot on the roof could be tough.

Pinpointing the Problematic Section

If your ceiling is roomy enough to accommodate your size and if you are up to it, you can wiggle your way inside. Usually, ceiling water stains travel along the lumber, trusses or roof panels in your ceiling before finally dripping on the stained area.

It is even possible that the leak may be located some distance away from where ceiling water stains appeared. What you can do is to trace the water trails from the stained spot until you find the source. This could take some time, but with patience and some detective skills, you will be able to locate it.

Determining the Cause

If the stains seem to worsen especially after a downpour, the culprit could be the flashing. This is among the issues pointed out by Real Estate Inspector. You should know that changing step flashing can be complicated because you need to fit it in with the roof and nearby siding.

If you feel this job is beyond you, getting in touch with experts on roofing in Tauranga like Kiwispout NZ LTD  should be your next option. Another possible cause of the leak is damaged sealant strips due to critters getting inside your roof. To prevent these animals from going to the roof, you need to trip branches touching or near your roof.

You need to thoroughly examine your roof at the first sign of water stains forming on the ceiling. Do not wait until it worsens because these nasty stains can cause other problems besides an ugly mark.

If you do not have the time to do it or have no experience with roof problems, you can contact a roofing inspector. They can check the roof for you and make a determination what is causing it, then provide recommendations on how it can be resolved. Remember, the roof plays a major role in your house and giving it proper attention and care should always be paramount.

 

 

Businesses for the Environment

Service Week January 30, 2017 at 8:52 am

Helping the Environment in UtahEven businesses here in Utah need to do their part to help the environment. You don’t have to plan for a big green initiative. You can do several small and easily done things in your business that can reduce your company’s impact on the environment.

Simple Programs

You can start with a waste segregation, recycling, and waste diversion program. A first step is to find a strategic location for your garbage collection bins. The strategic location must be in a place where your employees find it easy and convenient to throw any trash or waste such as in the break room.

Next, you can station your trash, recycle, and compost bins next to each other, yet use differing colors for each of the bins. You can also place signs above the bins that can illustrate which items go in which bin. All of this help in making waste segregation easier for people. Once finished, you can notify the whole company, especially the janitorial staff, about the program.

Another Green Step Forward

You can further improve on your waste segregation, recycling, and waste diversion with a few simple tricks. For one, you can encourage your employees to use washable dishes, mugs, and silverware. You can reduce the amount of paper your company consumes by printing double-sided and by re-using printed material with mistakes as scratch paper.

A Green Step Even Further

You can go a step even further if your business is a large industrial company. You can hire an environmental services provider that offer remediation and other services. Environmental services can help manage waste and other environmental elements in mining, oil, and other industries.

To find the right environmental services provider, you can look for one that will manage all your environmental projects in the long term. You can also consider the technological and regulatory expertise of the provider. Finally, find a provider that can speak board language as well as optimize EH&S processes.

No matter the size of your business or company, you can greatly impact the environment. You can choose to help it.

Outsource or Maintain an In-House Janitorial Staff?

Service Week January 11, 2017 at 6:57 am

Janitorial Services

Business owners should fully understand the importance of workplace cleanliness, as it plays a major role in the productivity of their workforce. It contributes greatly to the public’s perception, as well. You wouldn’t want prospective clients to be turned off, do you?

As cleanliness and sanitation affect many aspects of your business, you should never take it lightly despite how busy you are. Fortunately, many janitorial services in Dallas, TX are available to provide you with a cost-effective and efficient solution that keeps the workplace safe, healthy, and hazard-free for everyone.

Custodial Staff: Maintaining an In-House Team

Before hiring an in-house custodial team, you should first explore your options. More companies today choose to outsource all sorts of services, from information technology to commercial cleaning.

Convenience is a primary factor. Before you can build your own cleaning staff, you need to complete the hiring process. This will take up a lot of time, though, since you have to conduct individual interviews and perform background checks on each applicant. Even if you have a human resources department, this means more work for them. The greater the additional amount of work, the more resources you spend.

The Outsourced Janitorial Service Advantage

Outsourcing doesn’t only benefit your business in the short run; it also delivers a number of long-term benefits. The biggest of these is the considerably reduced overall cost. Outsourcing cleaning services means eliminating the need for allotting a monthly budget for personnel and materials. You can expect them to have their own cleaning equipment, tools, and other essentials.

Do your part in making sure you choose a firm that’s known not only for delivering top-notch services, but also highly trustworthy and experienced custodial members.

3 Essential Tips Cow Breeders Should Know

Product Review December 13, 2016 at 8:46 am

Cow BreedingAs a responsible dairy farmer, you need to ensure that your cows are getting the proper care. From the right food to the right type of activities, knowing these best practices can help you raise a good animal that can yield good produce.

Inspect the stock before buying them. What you want are cows that look alert with eyes bright and free of any discharge. Pay attention to how the animal breathes. The breathing shouldn’t be laboured, rather, it should be regular and smooth. Watch out for coughing animals or the ones that have mucus running down from the nose. Check the animal’s body for any swollen parts and watch them move. Healthy animals should be able to stride easily.

Make sure you have a proper maternity pen for your pregnant animals. These pens should be placed in a quieter area of your barn. Make sure there’s a good air flow and the area is well lit and insulated. The bedding is usually made from long straws and should be at least 4 inches thick. Cleaning the maternity pen before the animal gives birth will help lower the risk of having navel infections and other illnesses when the calf is born.

Ensure that the calves are eating properly and getting the right nutrition. Now, a calf meal like Takanini Feeds is usually decided by the farmers but typically, calves consume milk from their mothers only for a short period of time. After which, farmers can then decide to continue feeding them milk from other herds or other calf meals to make sure they’re getting the right nutrients they need to grow strong.

Raise Them Well

Raising a healthy breed of animals require a good eye, good institution, dedication and best practices. If you are planning to breed cows or raise them for dairy produce, use these tips to help you raise a good stock.

Maintaining and Using Liquid Fertilizer Tanks

Product Review October 18, 2016 at 3:00 am

Liquid fertilizer tanksStoring liquid fertilizers and pesticides is a necessity for many farmers. Since chemicals can be volatile, they require inert containers for safe storage. Storage tank users have to follow a few safety guidelines. A ruptured or damaged tank can lead to contaminated soil and may damage property, too. Sometimes, failure happens due to poor design, construction and a lack of maintenance.

To minimize the effects and prevent possible failures, follow these steps when maintaining liquid fertilizer tanks.

  • Don’t buy used tanks as moving and installing them in a new spot can lead to problems.
  • Make sure every employee is aware of operational hazards that accompany such tanks.
  • Fill tanks only to the recommended level.
  • Do regular inspections and ensure that there are no leaks. Check welded areas for any signs of trouble.
  • Check more often during cold weather as steel can become very brittle.
  • Drain tanks before carrying out repairs in case of corrosion or other problems.
  • After inspection and maintenance, ensure that repairs are done based on standards. If repairs are not possible, replace the tank with a new one.
  • Ensure that secondary containment is done in ways to prevent a leaking tank doesn’t compromise the safety of other tanks.
  • Have an emergency plan in place to account for every contingency.

The EPA website is a good source of information for safety checklists and maintenance tips. Download and print out all the required papers and checklists. Keep them in an accessible place and ensure that all the users are aware of safety procedures and follow them to avoid problems.

Funko Pop: The Rise of the Modern Bobble Head

Modern Market September 28, 2016 at 1:00 am

A traditional bobble head on a car deskBobbleheads were extremely popular in the 60s – these small, plastic figures had tiny bodies and oversized heads, which wobble and nod with every movement. Attached to some kind of spring, they were the preferred toy that graces office desks and car dashboards.

Today, a new type of bobblehead is on the market – Pop vinyls, more popularly known as Funko Pops, are taking the world by storm. Though their heads do not wobble, the toys have impressive variety. Just take a look at pop vinyl stores such as Global Gear and you will find over 200 different versions of the toys. This is not even the complete inventory, as the company that makes Pop vinyls have over 1,000 licensed characters registered to their name.

From Humble Beginnings

Funko began as a small toy company in the U.S. In 1996, founder Mike Becker decided to sell his own bobbleheads, coin banks, and hand puppets. He wanted to create toys that bring about a sense of nostalgia – he found modern toys too complex, with too many features, and just wanted to make something that is straight-to-the-point and simple.

He started creating toys out of licensed characters such as Popeye, Count Chocula, and the Big Boy mascot. His company kept growing, and eventually, he decided to introduce the Funko Force line, which debuted at the San Diego Comic Con of 2010. It was initially met with a lukewarm response – people complained that the heads did not bobble.

Eventually, he managed to gain the license of several more figures, including DC comic characters like Green Lantern and Batgirl. These more up-to-date characters proved to be more popular among toy lovers.

Every Fandom Ever

Funko Pops are popular because of their pop culture appeal – with hundreds of characters to choose from, it encompasses many fandoms, from comic fans to sports fans. People love collecting familiar characters, especially if they are rendered in such an adorable form.

As more characters are added to the Vinyl Pop collection, more people will buy the toys – they simply love seeing their fandoms represented in merchandise.

3 Tips That Will Make Moving a Breeze

Service Week July 15, 2016 at 6:15 am

Woman Holding a Box

Change is never easy for any person no matter how much they are open to it. However, it is inevitable in most cases. A new and promising job has come up, a business opportunity you cannot pass or a great chance to follow your dreams has presented itself but a challenge exists.

To get all this you need to move out of your comfort zone. Leave your familiar hometown with friends you have known for years to a place where nothing is familiar apart from the hope for a better future. Most people take the risk and decide to move and this is where you need the assistance of great moving companies in Salt Lake City. The following tips will make your moving life easy and probably help you settle in faster.

Knowing the number of things, you need to move

Preparation is essential before you move. Understanding the number of things, you must move means that you will be able to get enough boxes and packing items to fit everything. Estimate the items depending on their sizes. The last thing you need is stress over packing.

Be orderly

Moving is only temporary. You need to know where everything is when you arrive at your destination. Make sure that you mark boxes clearly for fragile items and those that are likely to be lost when moving. Furthermore, doing this makes it easy to unpack and rearrange your new house once you arrive. Proper packing makes it easy for the movers to help you settle in.

Keep time when moving

Find out the distance of your new town. It is important to travel at the right time especially when you decide to enlist the services of a moving company. Avoid moving on weekends and holidays when there is a lot of traffic. It is important to arrive at your destination before dark. Let people see you coming in. you may be lucky to make new acquaintances.

Work with a team of professional movers. The extra dollars you pay is worth every penny. Convenience is key.

Why Jumping on a Trampoline is Good for Your Health

Next Stop May 4, 2016 at 1:00 am

TrampolineNot many people are aware of it but trampoline jumping is actually good for the body. Sure, it’s fun and exciting to do. But if you think about it, trampoline jumping can also be a great alternative to traditional physical exercises.

Improve coordination

Jumping on an inground trampoline can help improve your balance and motor skills, says Trampolines.com. Apart from being useful for sports training, it is also great for those suffering from a physical condition that puts them at risk of falling even when they are just walking. Regular trampoline jumping lets them improve their sense of balance and coordination over time.

Enhance low cardio exercise

Common gym movements such as lunges, jumping jacks, and squats can be modified for the trampoline. In fact, trampoline jumps have the same effect as low cardio exercise but with the additional benefit of muscle strengthening. With regular trampoline exercises of 20 minutes for 3-4 times a week, your body will increase its metabolism. Which, in turn, burns off fat.   

Relieve stress

It really is fun to jump on a trampoline. This is partly due to the release of “happy” hormones like endorphins, which creates a feel good sensation. Jumping can also release the tension in your abdominal muscles, jaw, chest, and back, allowing you to feel more relaxed. So jump away and relieve your stress and anxieties.

There are different types of trampolines available in the market today. They are designed for recreational or competitive purposes and vary in terms of size, cost, and quality. If you are looking to purchase one, make sure to choose something that gives good value for your money.

Choose a trampoline that is not only well-constructed, but also shows durability thanks to its high-quality materials. With an excellent quality and durable trampoline, you will surely make your jumps more fun and enjoyable since you won’t have to worry about breaking it down.

Concrete Services Offered by Construction Experts

Next Stop April 13, 2016 at 5:42 am

Construction Experts in UtahConstruction expert offers construction and repair for small and large projects. Clients ranging from businesses, mining industries, homeowners, and contractors require different types of construction needs.

Greene’s Construction enumerates some common type construction services that are usually unheard of by clients:

Random Radon Testing

Various environmental quality and safety organizations advocate for the awareness and mitigation of radon gas to homeowners.

Radon gas is an odorless and invisible gas that enters homes through the house foundation and goes undetected. It’s a by-product of the radioactive uranium breakdown in the soil and can cause some fatal health issues such as leukemia and lung cancer. Despite radon gas’ undetected entry into homes, random tests are available that aim to detect the gas. Effective detection and mitigation system cut the harmful gas’ entry into homes granting your safety.

Wall and Flat Sawing

Flat sawing uses a flat saw that penetrates concrete. It’s useful in preparing cracks for repair, removing damaged parts during demolition, and provides expansion joints. Wall sawing, on the other hand, creates openings through concrete walls. It’s also used for selective demolition of existing construction structures.

Structural Demolition

Demolition services serve commercial, industrial, and residential projects. The demolition capabilities include sidewalk, driveway, selective, patio, and full structure demolition. Most technologically advanced demolition equipment offer excavation, hauling, and site work services.

From concrete placements to concrete cutting, construction experts combine skill with technology to ensure they do the right job and in the right way. Experts use the latest technology and innovation to provide quality services with accuracy and precision.

The Birth and Rebirth of Simple Machines

Next Stop April 13, 2016 at 5:37 am

Human beings are notable for their capacity to exceed expectations. Throughout history, people have developed a lot of equipment to make working easier. Before that, they used to do everything manually. It took a lot of effort and willpower to finish a menial task.

Work is defined as force acting on an object in the direction of movement. A machine makes work easier by transporting force from one place to another. It allows change of direction for a force. It also increases the size, speed or distance of the said force.

The Origin of the Six Simple Machines

The earliest known writings about simple machines date from the third century B.C.E., provided by Archimedes. He’s the first to recognise mathematical principles of the lever. In ancient Egypt, it’s the common equipment. Constructors used it to lift obelisks.

Poland first used the wheel and axle around 3500-3000 BC. Slovenia discovered windlass, the oldest device known. It lifts weights with the use of a pulley.

Mesopotamians first operated a pulley in 1500 B.C. But, Archimedes created the first compound pulley.

It is unclear where wedge originally came from. Based on historical artefacts, Greeks may have used it on sculptures and arrowheads.

Greeks first used a screw in a screw press. Archimedes had the credit for its invention, but there were signs of it starting in Ancient Egypt instead. They used it in clocks and to move things in the 15th century.

In the prehistoric times, they already used inclined planes. It wasn’t perceived as a machine then, since it didn’t have a mechanical aspect. The rocks in the Stonehenge were moved using it.

The Reincarnation of the Six Simple Machines

In the modern world, simple machines are in everyday objects. The lever is in crowbars, bottle openers and scissors. It is also on playground seesaws. The wheel and axle work as gears in elevators and cars. The pulley is on flagpoles and blinds. The inclined plane is used as a playground slide and in ramps. The wedge is in nails, knives and axes. The screw holds or moves things together.

Human beings incorporate simple machines into heavy machineries. Cranes, tractors and loading equipment are a few examples. It’s the combination of most of the simple machines into one.

Centuries after the discovery of simple machines, humans  keep on creating complex ones to accommodate a developing world.

kanga-loader-lge